Operation CHARM: Car repair manuals for everyone.

Windshield, Removing, Installing And Assembly Overview









1 - Windshield
- Removing windshield. Windshield, Removing
- Installing windshield. Windshield, Installing
- Clearance to roof: dimension -a- = 4 mm


NOTE: Any stickers to be placed on the windshield (e.g. airbag) must be placed at same position on new window.


2 - Cover strip
- Slide to center before installation of window
- Note installation marking on cover strip See Fig. 1
3 - Adhesive bead
- Pay attention to thickness of adhesive bead and windshield frame clearance gap. Windshield, Preparing For Installation
4 - Spacers
- Pay attention to thickness of various spacers See Fig. 1
- Thickness of external spacers (2x) = 6.5 mm
- Thickness of internal spacers (2x) = 7.5 mm

Fig. 1 Gluing On Lower Spacers







- Glue three internal spacers -6- (thickness = 7.5 mm) centered to both window and window wiper markings -5- at distance to lower edge of dimension -b- = 25 mm ± 5 mm
- Glue external spacers -4- (thickness = 6.5 mm) at distance to lower external edge of dimension -a- = 0-5 mm.
- When installing cover strip -2- on window -1- make sure notches (arrow) engage flush with window edge.
- Insert spacing device -3-.