Windshield, Installing
- After performing preparatory work, cut tip off nozzle as shown.
- Dimension -a- = 12 mm
- Width of adhesive bead = 8 mm
- Arrow indicates direction of application
NOTE: The cross-section thickness of the adhesive bead is determined by the dimension of the opening in the nozzle tip and the rate of application.
- Apply adhesive sealing material (bead) around circumference of windshield as shown.
Distance between center of adhesive bead and edge of windshield is 8 mm.
- Using two suctioned lifters, install windshield in windshield opening.
CAUTION!
Windshield must be installed within 10 minutes; otherwise, proper adhesion of the sealing material will be impaired.
- Align windshield at sides.
Spacing between edge of windshield and roof frame must be 4 mm.
- Press drip rail -1- into securing clips -3- starting at top and working downward.
Drip rail lip (arrow) must not extend beyond engagement line-radius of gap cover -5-.
4 - Self-adhesive spacers
- Press drip rail -1- into securing clips -3- until stop.
- When pressing in drip rail, make sure sealing lip lies flat against windshield and does not slip behind edge of windshield.
2 - Hollow rivet
- Secure window glass in windshield opening using adhesive tape during curing process.