Installation
HEATING / AIR CONDITIONING: FRONT EVAPORATOR TEMPERATURE SENSOR (for Sedan): INSTALLATION
1. INSTALL NO. 1 COOLER THERMISTOR
(a) Install No. 1 cooler thermistor as shown in the illustration.
Installation Position
Text in Illustration
NOTICE:
* Be sure to insert the sensor only once because reinserting it will not allow it to be firmly secured.
* When reusing the evaporator, insert the sensor one row next to the one that was used previously (*d in the illustration).
* After inserting the sensor, do not apply excessive force to the wire.
* Directly insert the sensor until the edge of the plastic case "*1" comes into contact with the evaporator "*2".
2. INSTALL NO. 1 COOLER EVAPORATOR SUB-ASSEMBLY Reassembly
3. INSTALL COOLER EXPANSION VALVE Reassembly
4. INSTALL AIR CONDITIONING UNIT
Installation