How To Proceed With Troubleshooting
CRUISE CONTROL: CRUISE CONTROL SYSTEM (for Sedan): HOW TO PROCEED WITH TROUBLESHOOTING
HINT
* Use the following procedures to troubleshoot the cruise control system.
* *: Use a Techstream.
1. VEHICLE BROUGHT TO WORKSHOP
NEXT -- Continue to next step.
2. PROBLEM SYMPTOM CONFIRMATION
NEXT -- Continue to next step.
3. CHECK CAN COMMUNICATION SYSTEM*
(a) Check for output DTCs.
Result:
HINT
The ECM of this system is connected to the CAN communication system. Therefore, before starting troubleshooting, be sure to check that there is no trouble in the CAN communication system.
B -- PROCEED TO CAN COMMUNICATION SYSTEM
A -- Continue to next step.
4. DTC CHECK AND CLEAR*
Refer to the DTC CHECK / CLEAR Reading and Clearing Diagnostic Trouble Codes.
NEXT -- Continue to next step.
5. DTC CHECK (OTHER THAN CAN SYSTEM DTC)*
Result:
A -- GO TO STEP 7
B -- Continue to next step.
6. DTC CHART
Refer to the DIAGNOSTIC TROUBLE CODE CHART Cruise Control System (for Sedan).
NEXT -- GO TO STEP 10
7. PROBLEM SYMPTOM CONFIRMATION
Result:
A -- GO TO STEP 9
B -- Continue to next step.
8. SYMPTOM SIMULATION
Refer to the ELECTRONIC CIRCUIT INSPECTION PROCEDURE Electronic Circuit Inspection Procedure.
NEXT -- Continue to next step.
9. PROBLEM SYMPTOMS TABLE
Refer to the PROBLEM SYMPTOMS TABLE Symptom Related Diagnostic Procedures.
NEXT -- Continue to next step.
10. CIRCUIT INSPECTION
NEXT -- Continue to next step.
11. TERMINALS OF ECM
Refer to TERMINALS OF ECM Pinout Values and Diagnostic Parameters.
NEXT -- Continue to next step.
12. IDENTIFICATION OF PROBLEM
NEXT -- Continue to next step.
13. REPAIR OR REPLACE
NEXT -- Continue to next step.
14. CONFIRMATION TEST
NEXT -- END