Pinout Values and Diagnostic Parameters
CRUISE CONTROL: CRUISE CONTROL SYSTEM (for Sedan): TERMINALS OF ECM
1. CHECK ECM
(a) Measure the voltages of the wire harness side connectors.
Standard voltage:
* *1: for Manual Transaxle
* *2: for Automatic Transaxle
If the result is not as specified, there may be a malfunction on the wire harness side.
2. WAVEFORM 1(Reference)
CAN communication signal
HINT
The waveform varies depending on the CAN communication signal.
3. WAVEFORM 2(Reference)
CAN communication signal
HINT
The waveform varies depending on the CAN communication signal.