Temperature Sensor Fluid, Transaxle, (TFT)

Temperature sensor fluid, transaxle, (TFT)

Side cover, gearbox, removing
See Side cover transmission, removing Side Cover Transmission, Removing.

Removing the cable harness





Remove:
- the connectors. No marking is necessary. Each connector is designed for only one component
- the cable harness from its clips and holder
- the large connector. Bend it down slightly and pull it straight out.

Installing the cable harness





Install:
- the large connector
- the connectors on the relevant switches
- the cable harness in the clips and holder
- the temperature sensor in the clip.

Installing the side cover on the gearbox
See Side cover transmission, installing Side Cover Transmission, Installing.