Fan Housing
Fan Housing
Fan housing, removing
Removal
- Remove the dashboard according to Dashboard.
Cars with air conditioning (A/C):
- Remove the air conditioning (A/C) pipe in the engine compartment from the support.
- Slacken off the bolts on top and the nut underneath. Pull the power unit backwards as far as possible.
- Remove the connector from the blower fan motor and the recirculation damper motor.
- Remove the support from the dashboard (2x nuts).
- Remove the mounting nuts from the fan housing (3x).
- Carefully pull the housing backwards. Remove it with a twisting movement.
Installation
- Assemble in reverse order.
Hint: Check the seal between the fan housing and the intermediate section. Tightening torque: Mounting nuts on the housing to the heater unit motor: 25 Nm.