Operation CHARM: Car repair manuals for everyone.

Fan Motor




Fan Motor

Blower fan motor, removing

Remove the fan (fan housing removed)







- Remove the lower cover on the passenger side, see Dashboard.
- Cut 10 x 7 cm in the insulation panel and bend the panel.
- Remove the three screws.
- Disconnect the connector from the blower fan motor.
- If there is an ultrasonic control module: place it to one side.
- Pull the motor down and withdraw it (turn it 90 degrees).

Installation

- Install in reverse order.
- Check the seals.
- Install the insulation panel and secure it with tape.