Operation CHARM: Car repair manuals for everyone.

Fuel System - Changes

SECTION
2

GROUP
23

NO.
816

DATE
Nov. -95

Changes to fuel system for model year 1994 -->
800

REFERENCE: TP 2301202, SECTION 2(23, 28) MOTRONIC 4.3 SFI/DI ENGINE MANAGEMENT SYSTEM; 850 1994-

Changes to fuel system for model year 1994-

New type of connection between the fuel line and the pressure pipe, M/Y 1995-





The fuel line is inserted in the pressure pipe and sealed with an O ring. The fuel line is locked into place on the pressure pipe by turning the pressure pipe approx. 90 in relation to the fuel line which causes a metal tongue on the connection to lock in a groove on the pressure pipe.





If the pressure pipe has to be detached from the intake manifold, M/Y 1995-

To avoid draining the fuel system attach a tie strap as shown in the illustration to prevent rotation between the fuel line and the fuel pressure pipe when it is detached from the intake manifold and lifted away. Failure to do this may result in fuel leaking out in the engine compartment.





Removal of the plastic cover that protects the fuel lines, M/Y 1994-

Pull down on the cover while simultaneously loosening the plastic nut.

When reinstalling the nut, press it onto the cone-shaped mounting screw and tighten a few turns with a screwdriver. (DO NOT overtighten.)





New evaporative emission (EVAP) canister and plate under tank

From model year 1995, some 855 cars with market code 31 (California) have a larger evaporative emission canister, and a reinforcement plate under the fuel tank.

The market code is specified on the product plate.

Method for detaching the evaporative emission (EVAP) canister, M/Y 1995 (some cars)

The evaporative emission canister is located below the left fender and in front of the wheelhousing.





Shown in the illustration is the evaporative emission canister and the mounting bracket for the canister.

The evaporative emission canister is detached by undoing the screw marked "A". The long screw is mounted in the bracket so that when the hexagonal screw head is turned (several times) the clamp in the bracket's upper edge releases and the evaporative emission canister can be lifted out.

Replacement of fuel tank, M/Y 1995 (some cars)





There is a reinforcement plate located under the fuel tank. When disassembling the tank first remove the nut (B). Then detach the plate from the body and lower the plate and tank down.

When reinstalling the reinforcement plate on the fuel tank, the nut is to be tightened to 10 Nm (7 ft.lbs).