Reinstalling Engine Cooling Fan (FC)

Install:





- Engine cooling fan (FC) with shroud on the radiator. Position the air guide with the relay on the radiator.

- Secure the cable in the tie strap and the clip on the engine cooling fan (FC) shroud.

Install:





- EVAP valve on the engine cooling fan (FC) shroud.

- Two clips around EVAP hose on engine cooling fan (FC) shroud.

- Charge air pipe between the charge air cooler (CAC) and hose on the throttle body.

- Slide the EGR converter into the track in the upper air guide and check that it is secure.





Connect engine cooling fan (FC) connectors.

Install:





- Two spacer washers in the top of the tracks.

- Engine cooling fan (FC) shroud and upper air guide with four screws.

- Throttle cable.

- Throttle pulley cover.

- Air duct to the control module box.

- Air intake and intake hose to air cleaner (ACL).