Removal

Disconnect battery ground lead A1







Remove gear selector panel and housing A2

Remove retaining screws and slide housing backwards.



Remove: A3





- knee bolster. Bend aside insulation behind bolster.

- center console panel on left-hand side



Loosen and fold aside carpet around front end of gear selector mechanism A4



Remove: A5





- panels on both sides of combined instrument

- instrument retaining screws



Lift instrument slightly and carefully undo connectors at rear. Remove instrument A6



Disconnect key lock cable at ignition switch A7





Turn ignition key to position I or II.

Use a 4-5 mm dia. (0.15 - 0.19 in.) pin to depress upper locking tab of cable in ignition switch. Withdraw cable.



Remove cable adjuster locking clip (1) at gear lever end A8



Move gear selector lever to position P A9

Unhook cable at gear lever end. Undo clip and withdraw cable under center console.