Operation CHARM: Car repair manuals for everyone.

Solenoid Replacement





NOTE: Solenoid valve and control valve are integral and replaced as an assembly. Use 25 mm (1 in) crowfoot wrench (Volvo tool P/N 5172) for removing and installing.

1. Disconnect wires at connectors. Attach crow-foot wrench. Use extension and wrench as appropriate. Remove solenoid.





2. Apply ATF oil to the new O-rings. Install solenoid. Use crow-foot wrench and torque wrench. Torque to 42-55 Nm (30-40 ft lb).