Removal
P1
Remove battery negative lead.
P2
Drain system of coolant. Cooling System
P3
Remove:
- glove compartment.
- panel beneath glove compartment.
- side panel facing heater.
- RH defroster vent and air duct.
P4
Remove thermostat:
Note: The position of the thermostat (1) may vary. In later models (1979-), the capillary tube is on the evaporator pipe.
P5
Undo and plug coolant hoses.
P6
Remove:
- expansion valve.
- insulation.
- cover (2).
P7
Remove screws from evaporator. Pull out carefully.