Hybrid Power Control Module: Service and Repair

Electric Drive Power and Control Electronics (JX1), Replacing

Special tools, testers and auxiliary items required

• Vehicle Diagnosis, Testing and Information System (VAS 5051B)

If the electric drive power and control electronics is replaced, complete the following adaptations in the order listed:

- Connect the (VAS 5051B).

- Select "Guided Fault Finding" in the (VAS 5051B).

- Using the "Go To" button, select "Functions/Component selection" and the following menu options in sequence:

1. Adapt the electric drive power and control electronics to the immobilizer.

• Body

• Electrical Equipment

• OBD capable systems

• 51 - Electric drive | J841

• 51 - Electric drive, functions

• Adapt electric drive power and control electronics to immobilizer

2. Code the electric drive power and control electronics.

• Body

• Electrical Equipment

• OBD capable systems

• 51 - Electric drive | J841

• 51 - Electric drive, functions

• 51 - Code control module

3. Calibrate the Electro-drive drive motor (V141).

• Body

• Electrical Equipment

• OBD capable systems

• 51 - Electric drive | J841

• 51 - Electric drive, functions

• 51 - Calibrate electro-drive drive motor