Central Locking Assembly Overview

Central Locking Assembly Overview






1 Connector station

• Installed location: left A-pillar

• To disconnect harness connector, loosen the boot off at pillar

2 Front passenger door control module (J387)

• Integrated inside the front passenger window regulator motor (V148)

• Removing and Installing, refer to => [ Front Window Regulator Motor ] Service and Repair

3 Front passenger door lock

• Door lock is secured to inner door part.

• Electrical central locking system is integrated in door lock.

• Removing and Installing, refer to => [ Door Lock ] Door Lock

4 Connector station

• Installed location: right B-pillar

• To disconnect harness connector, loosen the boot off at pillar

5 Right rear door control module (J389)

• Integrated inside the right rear window regulator motor (V27)

• Removing and Installing, refer to => [ Rear Window Regulator Motor ] Service and Repair

6 Right rear door lock

• Door lock is secured to inner door part.

• Electrical central locking system is integrated in door lock.

• Removing and Installing, refer to => [ Door Lock ] Door Lock

7 Fuel tank lid unlock motor (V155)

• Removing and Installing, refer to => [ Actuator ] Actuator

8 Rear lid lock

• Installed location: on the rear lid

9 Release button in rear lid handle (E234)

• Installed location: on the rear lid

• Removing and Installing, refer to => [ Actuator ] Actuator

10 Left rear door lock

• Door lock is secured to inner door part.

• Electrical central locking system is integrated in door lock.

• Removing and Installing, refer to => [ Door Lock ] Door Lock

11 Left rear door control module (J388)

• Integrated inside the left rear window regulator motor (V26)

• Removing and Installing, refer to => [ Rear Window Regulator Motor ] Service and Repair

12 Driver side door lock

• Door lock is secured to inner door part.

• Electrical central locking system is integrated in door lock.

• Removing and Installing, refer to => [ Door Lock ] Door Lock

13 Connector station

• Installed location: left B-pillar

• To disconnect harness connector, loosen the boot off at pillar

14 Driver door control module (J386)

• Integrated inside the driver window regulator motor (V147)

• Removing and Installing, refer to => [ Front Window Regulator Motor ] Service and Repair

15 Driver side window regulator switch module

• Installed location: inside the driver door trim panel

16 Connector station

• Installed location: right A-pillar

• To disconnect harness connector, loosen the boot off at pillar

17 Vehicle electrical system control module (J519)

• Installed location: under the instrument panel on the driver side; clipped to the relay panel

18 Alarm horn (H12)

• Optional

• Installed location: in the plenum chamber

19 Engine hood contact switch (F266)

• Installed location: on the latch