Cross Panel, Cross Panel Assembly Overview

Cross Panel Assembly Overview

• Cross panel - 1 - is bolted and also bonded in with PUR adhesive sealing material - 4 -.






1 Cross Panel

• Removing:

- Cut through the bead of adhesive - 4 - after removing the screws - 3 -.

2 Body flange

3 PUR adhesive sealant

• DH 009 100 03

• Bead diameter: width - a - = 8 mm, height - B - = 10 mm

• Minimum curing time, refer to => [ Minimum Curing Time ] Minimum Curing Time

4 Bolt

• Quantity: 10

• Tightening specification: 25 Nm