Fender, Front Fender Assembly Overview

Front Fender Assembly Overview

• The illustration shows a left fender. The right fender is identical.






1 Fender

• Removing and Installing, refer to => [ Front Fender ] Front Fender

2 Bolt

• Quantity 1; A-pillar

• Quantity 2; wheel housing

• Quantity: 1; sill panel

• Quantity 2; fender brace

• Quantity: 3; fender connecting piece

• Tightening specification: 6 Nm

3 Fender end plate

• Removing and Installing, refer to => [ Fender End Plate ] Fender End Plate

4 Noise insulation, fender end plate

• Installed in front of the fender end plate, refer to => [ Noise Insulation and Foam Pieces, Fender and Fender End Plate ] Noise Insulation and Foam Pieces, Fender and Fender End Plate

• Not installed in all models

5 Foam piece

• Inserted between the fender and the wheel housing longitudinal member. Refer to => [ Noise Insulation and Foam Pieces, Fender and Fender End Plate ] Noise Insulation and Foam Pieces, Fender and Fender End Plate.

6 Fender brace

• Removing and Installing, refer to => [ Fender Brace ] Fender Brace

7 Bolt

• Quantity: 2

• Tightening specification: 6 Nm