Turn Signals: Service and Repair

Turn Signal and Entry Lamp Inside Exterior Mirror

• The following describes removing and installing the left turn signal. Removing and installing the right turn signal is identical.

• The turn signals have LEDs rather than bulbs.

• It is not possible to replace the LED. The entire turn signal must be replaced if damaged.

Removing






- Remove the mirror glass.

- Remove the frame.

- Remove the mirror housing..

Removing Entry Lamp Inside Exterior Mirror

- Remove the entry lamp - 3 - from the turn signal - 1 - in - direction of arrow -.

- Remove the bulb socket - 4 - from the entry lamp - 3 -.

Removing Turn Signals

- Disconnect the connector - 2 - from turn signal - 1 -.

Installation

• Always check the catches for damage and replace if necessary.

To install, perform the steps used for removal in reverse order.

• Then perform a function test.