Generator Overview

Generator Overview






1 Collar Bolt

• 20 Nm

• M8 x 110

2 Phillips Head Screws

• 2 Nm

• M4 x 19

3 Washer

• M5

4 Phillips Head Screw

• 4.5 Nm

• M5 x 21

5 Nut

• 15 Nm

• M8

6 Flat Hex Nut

• M8

7 Generator Cap

8 Phillips Head Screw

• 2 Nm

• M4 x 13

9 Voltage Regulator

• Removing and installing voltage regulator; Bosch, refer to=> [ Voltage Regulator, Bosch ] Voltage Regulator, Bosch or Valeo, refer to=> [ Voltage Regulator, Valeo ] Voltage Regulator, Valeo

10 Generator

• Generator, removing and installing, refer to=> [ Generator ] Generator.

• Generator (GEN), checking, refer to => [ Generator, Checking ] Testing and Inspection.

• Securing B+ wire to generator, refer to => [ B+ Wire Connection On Generator ] B+ Wire Connection On Generator.

• Removing and installing the ribbed belt pulley, refer to => [ Ribbed Belt Pulley ] Service and Repair.

11 Ribbed Belt

• Checking, refer to=> [ Ribbed Belt, Checking ] Testing and Inspection.

No Illustration

• M5 wire clamp nut to the rear side of the generator - 3.2 Nm.