Transmission

Transmission

• Do not run the engine and do not tow the vehicle if the transmission fluid pan is removed or if there is no fluid inside the transmission.

• Always clean the connection points and the area around them first, and then loosen them.

• When installing the transmission, make sure the alignment sleeves are correctly seated between the engine and transmission.

• Place any removed parts on a clean surface and cover them so that they do not get dirty. Use, foil, paper or a lint free cloth.

• Only install clean components: Remove the replacement parts from their packaging just prior to installing them.

• Carefully cover or seal unpacked components, if repairs cannot be performed immediately.

• With the transmission removed, secure the torque converter so that it cannot fall out.

• After installing, check transmission fluid level and fill, as necessary. Refer to => [ Transmission Fluid Level, Checking and Filling ] Transmission Fluid Level, Checking and Filling.







Transmission

The "6 speed, automatic transmission 09G" has 6 hydraulically controlled forward gears. By passing the torque converter slip, 2nd, 3rd, 4th, 5th and 6th gears become mechanically driven gears if the lockup clutch is closed.