Operation CHARM: Car repair manuals for everyone.

Central Locking Component Overview







Central Locking Component Overview






1 Alarm horn (H12)

• Installed location: in the plenum chamber

• Removing and installing

2 Connector station

• Installed location: Left A-pillar in the vehicle interior

• Remove the lower A-pillar trim in order to disconnect the connector.

3 Front passenger door control module (J387)

• Integrated in the front passenger window regulator motor (V148)

• Removing and Installing, refer to => [ Window Regulator Motor ] Window Regulator Motor

4 Front passenger door lock

• The door lock is attached to the door inner panel.

• The power central locking system is integrated in door lock.

• Removing and Installing, refer to => [ Door Lock ] Door Lock

5 Fuel tank lid unlock motor (V155)

• Removing and Installing, refer to => [ Fuel Filler Door Unlock Motor V155 ] Fuel Filler Door Unlock Motor V155

6 Rear lid lock

• Installed location: on the rear lid

• Removing and Installing, refer to => [ Rear Lid Latch ] Rear Lid Latch

7 Release element

• Installed location: on the rear lid

• Removing and Installing, refer to => [ Release Element ] Release Element

8 Driver side door lock

• The door lock is attached to the door inner panel.

• The power central locking system is integrated in door lock.

• Removing and Installing, refer to => [ Door Lock ] Door Lock

9 Driver door control module (J386)

• Integrated inside the driver window regulator motor (V147)

• Removing and Installing, refer to => [ Window Regulator Motor ] Window Regulator Motor

10 Driver side window regulator switch module

• Installed location: inside the driver door trim panel

• Removing and installing

11 Connector station

• Installed location: Left A-pillar in the vehicle interior

• Remove the lower A-pillar trim in order to disconnect the connectors.

12 Vehicle electrical system control module (J519)

• Installed location: under the instrument panel on the driver side

• Removing and installing

13 Engine hood contact switch (F266)

• Installed location: on the latch

• Removing and Installing