Operation CHARM: Car repair manuals for everyone.

Power Door Lock Switch: Service and Repair







Driver Interior Locking Button (E308)

• The push button illumination (L76) is integrated in the driver interior locking button can cannot be replaced separately.

• Turn off the ignition and all electrical consumers.

• Remove the key.

• When removing and installing components in visible area (switches, covers, trim, etc.), cover by taping the areas at which a prying tool ( trim removal wedge (VAS 3409) , screwdriver) will be positioned using commercially available adhesive tape.

Removing

- Remove the door trim panel..

- Disconnect the connectors.

- Open the tabs - arrows - and remove the driver interior locking button - 1 - from the door trim panel - 2 -.






Installing

Install in reverse order of removal.