Operation CHARM: Car repair manuals for everyone.

Transmission Mount, ASMT



Transmission and Mount Tightening Specifications (R32) - 02E, 6 Speed DSG A/T AWD





M12 - 80 Nm
^ When using the 18 mm socket wrench T10179 : 65 Nm.

M10 - 40 Nm
- Arrows point to alignment sleeves

Driveshaft
^ Shielding plate/driveshaft to bevel gear transfer case: 25 Nm

- Replace all left transmission mount bolts.
- First install all new bolts by hand.





- -A- first tighten bracket to transmission bolts -1- to 40 Nm with an additional 90° turn.
- When tightening bolts -2-, bracket can be pried into correct seating with screwdriver. - Bolts 2 - tightening specification: 60 Nm + 90°.

Subframe bolts must be replaced.