EVAP System Assembly Overview

EVAP System Assembly Overview





1 (EVAP) Evaporative Emission Filter

2 Bolt, 8 Nm

3 Bushing

4 Evaporative Emission (EVAP) Canister

• Component location: Bottom of the spare tire wheelwell.

• Removing and installing, refer to => [ EVAP Canister ] Service and Repair.

5 Nut, 6 Nm

6 Bracket

7 Support

8 Bracket

9 Bolt, 4 Nm

10 Rubber Grommet

11 Washer

12 Bolt, 8 Nm

13 Vacuum Line

• To the engine.

14 Leak Detection Pump (LDP) (V144)

• Component location: Under the right rear wheel housing liner in the wheel housing.

• Removing and installing, refer to => [ Leak Detection Pump ] Service and Repair.

• Checking fuel supply system for leaks. Refer to => [ Fuel/EVAP System, Checking for Leaks ] Fuel/EVAP System, Checking for Leaks.

15 Bolt, 4 Nm

16 Connecting Hose

17 Clamp

18 Air Filter Housing

• For the LDP.

19 Bracket

20 Connecting Pipe

• Clipped onto the bracket.

• To disconnect, press the release button on the connection piece.

21 Vent Line

• To the fuel tank filler tube.

• To disconnect, press the release button on the connection piece.

22 Vent Line

• To disconnect, press the release button on the connection piece.

23 Vent Line

• To the EVAP canister purge regulator valve.

• To disconnect, press the release button on the connection piece.