Operation CHARM: Car repair manuals for everyone.

Function 03 - Output Diagnostic Test Mode






Function 03 - Output Diagnostic Test Mode

The Output Diagnostic Test Mode is part of the electrical check. The following components can be checked by the Output Diagnostic Test Mode (DTM):

• Speedometer

• Tachometer

• Coolant temperature gauge

• Fuel gauge

• Malfunction lamps

• Seat belt warning lamp (when activated using code)

• Buzzer/Gong

• Displays (odometer, multifunction indicator or digital clock, selector lever position display for automatic gearboxes)

- If malfunction is determined when performing output DTM, exchange instrument cluster.

- If no malfunction is determined when performing output DTM, check wiring and connections to instrument cluster using wiring diagram.

Output Diagnostic Test Mode, Initiating

• Output Diagnostic Test Mode (DTM) cannot be initiated or will be interrupted if engine is running or vehicle is moving,

• Use C button to exit test sequence at any time.

- Connect scan tool (VAG 1551) , input address word 17 "Instrument cluster".

After control module identification and immobilizer identification number is displayed:

- Press -> button.

Indicated on display (select function):

Rapid data transfer HELP
Select function XX

- Press buttons 0 and 3 to select function 03 "Output Diagnostic Test Mode (DTM)".

Indicated on display

Rapid data transfer Q
03 - Output Diagnostic Test Mode

- Press Q button to confirm input.

No indication on all displays and all warning lights to be checked are unlit.

Indicated on display

Rapid data transfer ->
Analog display

After pressing Q button, the following instrument functional checks are carried out.

• Tachometer needle moves over complete display range

• Speedometer needle moves over complete display range

• Coolant temperature needle moves over complete display range

• Fuel gauge needle moves over complete display range

• On VDO instrument clusters, the instruments are activated simultaneously

• On MMO instrument clusters, the instruments are activated sequentially

After all instrument display range checks, the following constant values are displayed:





- Press -> button.

Indicated on display:

Output Diagnostic Test Mode ->
Warning lamp test Combi instrument

The warning lamps are activated and light continuously (includes all warning lamps for vehicle equipment having output DTM capability coded into the instrument cluster

- Press -> button.

Indicated on display:

Output Diagnostic Test Mode ->
Seat belt warning lamp K19

Safety belt warning lamp (K19) lights (when activated by code).

- Press -> button.

Indicated on display:

Output Diagnostic Test Mode ->
Gong

The buzzer/gong is activated and a warning tone is emitted at intervals.

- Press -> button.

Indicated on display:

Output Diagnostic Test Mode ->
Segment test

All liquid crystal segments in the speedometer display and tachometer are activated and appear on the display.

- Press -> button.

Indicated on display:

Output Diagnostic Test Mode ->
Coolant, excessive temp test

VDO Instrument cluster:

No display in instrument cluster!

High coolant temperature cut-out for the A/C clutch is activated approximately 5 seconds later.

MMO Instrument cluster:

Coolant temperature warning lamp lights and warning tone sounds.

High coolant temperature cut-out for the A/C clutch is activated approximately 5 seconds later.

- Press -> button.

Indicated on display for instrument clusters with manufacturer code MMO:

Output Diagnostic Test Mode ->
END

Indicated on display for instrument clusters with manufacturer code VDO:

Function is unknown or ->
cannot be carried out at the moment

End output diagnostic test mode for VDO instrument clusters by pressing -> button.

All actual values are displayed again.

Indicated on display (select function):

Rapid data transfer HELP
Select function XX

- Press buttons 0 and 6 to select function 06 "End output".

Indicated on display:

Rapid data transfer Q
06 - End output

- Press Q button to confirm entry.

Indicated on display:

Rapid data transfer Help
Enter address word XX

Tester is again in basic function.