Operation CHARM: Car repair manuals for everyone.

Heating and Ventilation System Assembly Overview






Heating and Ventilation System Assembly Overview

CAUTION!
Before beginning repairs on the electrical system:

• Obtain the anti-theft radio security code.

• Switch off all electrical consumers.

• Switch off ignition and remove ignition key.

• Disconnect negative ( - ) battery terminal.

• When disconnecting and reconnecting battery terminals, observe all applicable Notes and torque specifications, as well as instructions on performing OBD program and electrical system function checks as specified.





1 Heating and ventilation controls

• With Fresh Air Blower Switch (E9) and Fresh Air Blower/Recirculated Air Switch (E184)

• Removing and installing => [ Heating and Ventilation Controls ] Heating and Ventilation Controls

• Assembly => [ Heating and Ventilation Controls Assembly Overview ] Heating and Ventilation Controls Assembly Overview

• Installing and adjusting cables => [ Heating and Ventilation Cables ] Description and Operation

2 Dust and pollen filter

• Removing and installing => [ Dust and Pollen Filter ] [1][2]Dust and Pollen Filter

3 Side window air outlet

• Removing => [ Side Window Air Outlets ] Side Window Air Outlets

4 Side air outlets

• Removing => [ Side Air Outlets ] Side Air Outlets

5 Center air outlet console

• Removing => [ Center Air Outlet Console ] Center Air Outlet Console

6 Instrument panel cross member

• Loosening and tightening => [ Instrument Panel Crossmember ] Instrument Panel Crossmember

7 Fresh/Recirculating Air Door Motor (V154)

• Removing and installing => [ Fresh/Recirculating Air Door Motor ] Service and Repair

8 Fresh Air Blower (V2)

• Removing and installing => [ Fresh Air Blower ] Service and Repair

9 Fresh Air Blower Series Resistor With Fuse ( N24)

• First remove Fresh Air Blower (V2) => [ Fresh Air Blower ] Service and Repair

10 Intermediate duct

11 Cables

• Installing and adjusting => [ Heating and Ventilation Cables ] Description and Operation

12 Rear footwell air outlet duct

13 Gasket

14 Connecting duct

• With front footwell air outlet

• Removing => [ Connecting Duct ] Service and Repair

15 Heating and ventilation unit

• Removing:

• Remove instrument panel

• Carefully pinch off both coolant hoses to heater core and disconnect hoses.

• Loosen instrument panel cross member => [ Instrument Panel Crossmember ] Instrument Panel Crossmember

• Remove unit

• Disassembly and assembly => [ Heating and Ventilation Unit Assembly Overview ] Heating and Ventilation Unit Assembly Overview

16 Heater core

• Always use new coolant after replacement

• Replacing => [ Heating and Ventilation Unit Assembly Overview ] Heating and Ventilation Unit Assembly Overview

17 Heater core/bulkhead seal

• Note installation position => [ Heater Core Bulkhead Seal, Installation Position ] Heater Core Bulkhead Seal, Installation Position

18 Defroster duct

• Replacing:

• Remove instrument panel

• Loosen instrument panel cross member => [ Instrument Panel Crossmember ] Instrument Panel Crossmember

19 Instrument panel

• Removing and installing

20 Center air outlet duct

21 Defroster air outlet panel

• Removing => [ Defroster Air Outlet Panel ] Defroster Air Outlet Panel