Operation CHARM: Car repair manuals for everyone.

Driver Interior Locking Button (E308)







Driver Interior Locking Button (E308)

Special tools, testers and auxiliary items required

• Trim Removal Wedge (3409)

• The push button illumination (L76) is integrated in the driver interior locking button and cannot be replaced separately.


• Turn off the ignition and all electrical consumers.

• Remove the key.

• When removing and installing components in visible area (switches, covers, trim, etc.), cover by taping the areas at which a prying tool ( (VAS 3409) , screwdriver) will be positioned using commercially available adhesive tape.

Removal

- Remove the door trim panel.

- Disconnect the connector - 1 - and remove the screws - 2 -.






- Remove the door opener and driver interior locking button from the door trim panel.

- Release the tabs - arrows - and remove the driver interior locking button from the frame.






Installation

Install in reverse order of removal.