Operation CHARM: Car repair manuals for everyone.

Upper Control Arm Bushings - Checking

88vw12

GROUP

40

NUMBER

88-01

May 31, 1988

MODEL(S):

Vanagon, all m.y.
SUBJECT:

Upper control arm bushings, checking



An insufficient seal at the outer ends of the upper control arm bushings can cause premature wear to the bushings. Visually inspect the bushings as follows to determine if replacement is necessary.


Note

When checking the bushings, both front wheels must be on the ground.
^ Bolt head or nut/washer must be positioned in center of bonded rubber bushing.

^ If bolt head or nut/washer comes in contact with supporting ring (arrow), wear limit has been reached and bushing must be replaced.