Rear Wheel Alignment (for Sedan)

ALIGNMENT / HANDLING DIAGNOSIS: REAR WHEEL ALIGNMENT (for Sedan): INSPECTION

1. INSPECT TIRES Installation

2. MEASURE VEHICLE HEIGHT Installation

3. INSPECT CAMBER

(a) Install the camber-caster-kingpin gauge and position the rear wheel on the alignment tester.

(b) Inspect the camber.

Camber (Unloaded Vehicle):





NOTICE:
The tolerance for the difference between the left and right wheels is 0°30' (0.5°) or less for both cambers.

If the camber is not within the specified range, inspect the suspension parts and replace them if necessary.

4. INSPECT TOE-IN





Toe-in (Unloaded Vehicle):





HINT
Only measure C-D when A+B can not be measured.