Wiper and Washer Systems: Service Precautions
WIPER / WASHER: WIPER AND WASHER SYSTEM: PRECAUTION
NOTICE:
When disconnecting the cable from the negative (-) auxiliary battery terminal, initialize the following system(s) after the cable is reconnected:
1. PRECAUTION OF WASHER NOZZLE ADJUSTMENT
(a) Do not clean or adjust the washer nozzle with a safety pin, etc. because;
(1) the washer nozzle tip is made of resin and could be damaged.
(2) adjustment is not necessary because the washer nozzle is a spray type. If it is necessary to change the nozzle angle, replace the washer nozzle with one that has a different nozzle angle.
(b) If the washer nozzle is clogged with wax, etc., remove it and clean the nozzle hole with a soft resin brush, etc.