Crankshaft Main Bearing
CRANKSHAFTUsing a 12 mm socket wrench, tighten the bolts in several steps to the specified torque in the sequence shown in the illustration (*1).
Torque 22 Nm (224 kgf-cm, 16 ft-lbf)
Check that the crankshaft turns smoothly.
Mark the front of the bearing cap bolts with paint.
Retighten the bearing cap bolts by 90° in the same sequence as step (*1).
Check that the painted mark is now at a 90° angle from the front.
MAIN BEARING CLEARANCE, STANDARD & LIMIT
MAIN BEARING SIZE CODES
There are 4 sizes of standard bearings, marked 1, 2, 3 and 4 accordingly.
EXAMPLE: Cylinder Block 4 (A) + Crankshaft 3 (B) = Total 7 (Use Bearing 3)