Installation
BRAKE CONTROL: FRONT SPEED SENSOR: INSTALLATION
INSTALLATION
1. INSTALL FRONT SPEED SENSOR
(a) Install the speed sensor front LH with the bolt.
Torque: 8.0 Nm (82 kgf-cm, 71 in-lbf)
NOTICE: Prevent foreign matter from attaching to the sensor tip.
(b) Install the sensor harness brackets with the 2 bolts to the body and shock absorber assembly.
Torque: 5.0 Nm (51 kgf-cm, 44 in-lbf)
Torque: 19 Nm (192 kgf-cm, 14 ft-lbf)
(c) Connect the clamp to the steering knuckle.
NOTICE: Do not twist the wire harness for speed sensor front LH when installing the speed sensor.
(d) Connect the speed sensor connector and clamp.
2. INSTALL FRONT FENDER LINER LH
3. INSTALL FRONT WHEEL
Torque: 103 Nm (1,050 kgf-cm, 76 ft-lbf)
4. CHECK ABS SPEED SENSOR SIGNAL
(a) Check the ABS speed sensor signal Test Mode Procedure without VSC, or Test Mode Procedure with VSC).