Operation CHARM: Car repair manuals for everyone.

Blower Unit (For Hatchback)

DISASSEMBLY




1. REMOVE NO. 1 AIR DUCT SUB-ASSEMBLY
a. Disengage the 2 claws and remove the air duct.




2. REMOVE AIR INLET DAMPER CONTROL CABLE SUB-ASSEMBLY
a. Disengage the 3 claws and remove the air inlet damper control cable.




3. REMOVE BLOWER MOTOR
a. Remove the 3 screws and the blower motor.




4. REMOVE BLOWER RESISTOR
a. Remove the 2 screws and the blower resistor.




5. REMOVE AIR FILTER CASE
a. Pinch portion A to disengage the claw and remove the air filter case.




6. REMOVE AIR REFINER ELEMENT
a. Remove the air refiner element from the blower assembly.

REASSEMBLY




1. INSTALL AIR REFINER ELEMENT
a. Install the air refiner element into the blower assembly.

NOTE: Install the air refiner element with its UP mark oriented in the correct direction.




2. INSTALL AIR FILTER CASE
a. Insert the rib of the air filter case into the blower assembly.

NOTE: Install the air filter case with its UP mark oriented in the correct direction.

b. Pinch portion A to engage the claw and install the air filter case.




3. INSTALL BLOWER RESISTOR
a. Install the blower resistor with the 2 screws.




4. INSTALL BLOWER MOTOR
a. Install the blower motor with the 3 screws.




5. INSTALL AIR INLET DAMPER CONTROL CABLE SUB-ASSEMBLY
a. Engage the 3 claws and install the air inlet damper control cable.




6. INSTALL NO. 1 AIR DUCT SUB-ASSEMBLY
a. Engage the 2 claws and install the air duct.