Operation CHARM: Car repair manuals for everyone.

Pinout Values and Diagnostic Parameters





CAN COMMUNICATION: CAN COMMUNICATION SYSTEM: TERMINALS OF ECU

NOTICE:
* Turn the ignition switch off before measuring the resistances of the CAN main wire and the CAN branch wire.
* After the ignition switch is turned off, check that the key reminder warning system and light reminder warning system are not in operation.
* Before measuring the resistance, leave the vehicle for at least 1 minute and do not operate the ignition switch, any switches or doors. If doors need to be opened in order to check connectors, open the doors and leave them open.
HINT
Operating the ignition switch, any switches or any doors triggers related ECU and sensor communication with the CAN, which causes resistance variation.

1. JUNCTION CONNECTOR

(a) D-CAN J/C





HINT
*1: w/ ABS

*2: w/ Air conditioning or PTC Heater





2. JUNCTION CONNECTOR

(a) P-CAN J/C









(b) Wiring diagram for identifying CAN J/C connectors





3. DLC3





(a) Turn the ignition switch OFF.

(b) Measure the resistance.

Standard resistance





4. BRAKE ACTUATOR (SKID CONTROL ECU)

HINT
For vehicle with ABS only.

(a) Turn the ignition switch OFF.





(b) Measure the resistance.

Standard resistance





5. ECM

(a) Turn the ignition switch OFF.





(b) Measure the resistance.

Standard resistance





6. CENTER AIRBAG SENSOR ASSEMBLY





(a) Turn the ignition switch OFF.

(b) Measure the resistance.

Standard resistance





7. AIR CONDITIONING AMPLIFIER

HINT
For vehicle with air conditioning or PTC heater only.





(a) Turn the ignition switch OFF.

(b) Measure the resistance.

Standard resistance





8. MAIN BODY ECU









(a) Turn the ignition switch OFF.

(b) Measure the resistance.

Standard resistance





9. COMBINATION METER ECU

(a) Turn the ignition switch OFF.





(b) Measure the resistance.

Standard resistance





10. POWER STEERING ECU

(a) Turn the ignition switch OFF.





(b) Measure the resistance.

Standard resistance