Operation CHARM: Car repair manuals for everyone.

Wireless Door Lock Control System (W/ Smart Entry System)

TERMINALS OF ECU

Terminals Of Control Module/Pinouts - Check Instrument Panel J/B Assy (Multiplex Network Body ECU):




1. CHECK INSTRUMENT PANEL J/B ASSEMBLY (MULTIPLEX NETWORK BODY ECU)

a. Disconnect the 1A, 1B, 1D, 1E and 1J J/B connectors.
b. Measure the resistance and voltage of the wire harness side connector.




If the result is not as specified, there may be a malfunction on the wire harness side.

c. Reconnect the 1A, 1B, 1D, 1E and 1J J/B connectors.
d. Measure the voltage of the connector.




If the result is not as specified, J/B assembly (body ECU) have a malfunction.

Terminals Of Control Module/Pinouts - Check Smart Key ECU Assy:




2. CHECK SMART KEY ECU ASSEMBLY

a. Disconnect the S11 ECU connector.
b. Measure the resistance and voltage of the wire harness side connector.




If the result is not as specified, there may be a malfunction on the wire harness side.

c. Reconnect the S11 ECU connector.
d. Measure the resistance and voltage of the connector.




If the result is not as specified, ECU may have a malfunction.