Operation CHARM: Car repair manuals for everyone.

Ignition Relay No. 1


IGNITION RELAY (No.1) INSPECTION




1. REMOVE IGNITION RELAY (Marking: IG 1) FROM R/B No.3




2. INSPECT IGNITION RELAY
a. Inspect the relay continuity.
1. Using an ohmmeter, check that there is continuity between terminals 1 and 2.
If there is no continuity, replace the relay
2. Check that there is no continuity between terminals 3 and 5.
If there is continuity, replace the relay.




b. Inspect the relay operation.
1. Apply battery positive voltage to terminals 1 and 2.
2. Using an ohmmeter, check that there is continuity between terminals 3 and 5.
If there is no continuity, replace the relay.

3. REINSTALL IGNITION RELAY