Condenser Fan Resistor: Testing and Inspection

1. REMOVE ENGINE UNDER COVER LH.




2. REMOVE CONDENSER FAN RESISTOR.
a. Disconnect the connector.
b. Remove the 2 bolts and condenser fan resistor.




3. INSPECT CONDENSER FAN RESISTOR RESISTANCE.
Measure resistance between terminals.
Standard resistance: 1.3 ± 0.13 ohms
If resistance is not as specified, replace the condenser fan resistor.

4. INSTALL CONDENSER FAN RESISTOR.
a. Install the condenser fan resistor with 2 bolts.
b. Connect the connector.

5. INSTALL ENGINE UNDER COVER LH.