Operation CHARM: Car repair manuals for everyone.

Blower Motor Resistor: Testing and Inspection

Blower Resistor

1. REMOVE FRONT DOOR SCUFF PLATE RH
2. REMOVE COWL SIDE TRIM RH
3. REMOVE LOWER PANEL




4. REMOVE BLOWER RESISTOR
a. Disconnect the connector.
b. Remove the 2 screws and blower resistor.







5. INSPECT BLOWER RESISTOR RESISTANCE
If resistance is not as specified, replace the blower resistor.




6. INSTALL BLOWER RESISTOR
a. Install the blower resistor with the 2 screws.
b. Connect the connector.

7. INSTALL LOWER PANEL
8. INSTALL COWL SIDE TRIM RH
9. INSTALL FRONT DOOR SCUFF PLATE RH