Load Compensator: Testing and Inspection

ON-VEHICLE INSPECTION





1. INSTALL LSPV GAUGE (SST) AND BLEED AIR
2. RAISE MASTER CYLINDER PRESSURE AND CHECK REAR WHEEL CYLINDER PRESSURE





w/o ABS:





w/ ABS:
When inspecting the fluid pressure, inspect the left front and right rear together, and the right front and left rear together.
If the rear wheel cylinder pressure is incorrect, replace the P valve assembly.
3. REMOVE LSPV GAUGE (SST)
SST 09909-29018
4. BLEED BRAKE SYSTEM
5. CHECK FOR LEAKS