Operation CHARM: Car repair manuals for everyone.

Audible Warning Device Control Module: Testing and Inspection

INSPECT LIGHT-ON WARNING SYSTEM (INSPECT INTEGRATION RELAY OPERATION)
a. Connect the positive (+) lead from the battery to terminal 3.




b. Connect the negative (-) lead from the battery to terminals 7 and 11.
c. Check that the bulb lights and the buzzer sounds for 4 - 8 seconds.
d. Return to step (a), and operate the buzzer sound again.




e. Connect the positive (+) lead from the battery to terminal 9.
f. Check that the buzzer stops sounding.

HINT: Check the buzzer sound within a period of 4 - 8 seconds.

If operation is not as specified, replace the relay.

INSPECT LIGHT-ON WARNING SYSTEM (INSPECT INTEGRATION RELAY CIRCUIT)