Crankshaft Main Bearing
Main Bearing Oil ClearanceStandard clearance:
No. 3
STD: 0.025 - 0.044 mm (0.0010 - 0.0017 inch)
U/S 0.25: 0.027 - 0.067 mm (0.0011 - 0.0026 inch)
Others
STD: 0.015 - 0.034 mm (0.0006 - 0.0013 inch)
U/S 0.25: 0.019 - 0.059 mm (0.0007 - 0.0023 inch)
Maximum clearance: 0.08 mm (O.0031 inch)
NOTE: If replacing the cylinder block subassembly, the bearing standard clearance will be:
No. 3: 0.027 - 0.054 mm (0-0011 - 0.0021 inch)
Others: 0.017 - 0.044 mm (0.0007 - 0.0017 inch)
If the oil clearance is greater than maximum, replace the bearings. If necessary, grind or replace the crankshaft.
Reference Charts
NOTE: If using a standard bearing, replace it with one having the same number. If the number of the bearing cannot be determined, select the correct bearing by adding together the numbers imprinted on the cylinder block and crankshaft, then selecting the bearing with the same number as the total. There are 5 sizes of standard bearings, marked "1","2","3","4" and "5" accordingly.