Throttle Position Sensor: Testing and Inspection
THROTTLE POSITION SENSOR INSPECTION- Disconnect the throttle position sensor connector.
- w/ throttle opener
- Disconnect the throttle opener vacuum hose from throttle body.
- Apply vacuum to the throttle opener.
- Insert a feeler gauge between the throttle stop screw and stop lever.
- Using an ohmmeter, measure the resistance between each terminal.
- w/ throttle opener
- Reconnect the throttle opener vacuum hose to the throttle body.
- Reconnect the throttle position sensor connector
For circuit testing information refer to "DTC 41 - Throttle Position Sensor Circuit" under the Trouble Code Charts".
Testing and Inspection