EGR Control Solenoid: Testing and Inspection
VSV For EGR Circuit A/T And California:
1. Remove VSV.
2. Inspect VSV.
Checking The VSV:
a. Inspect VSV for open circuit. Using an ohmmeter, check that there is continuity between the terminals.
Resistance: 37 - 44 ohms at 20°C (68°F)
If resistance is not as specified, replace the VSV.
Checking The VSV:
b. Inspect VSV for ground. Using an ohmmeter, check that there is no continuity between each terminal and the body. If there is continuity, replace the VSV.
3. Inspect VSV operation.
Checking The VSV:
a. Check that the air does not flows from ports E to F.
Checking The VSV:
b. Apply Battery voltage across the terminals.
c. Check that the air flows from ports E to F. If operation is not as specified, replace the VSV.
4. Reinstall VSV