Operation CHARM: Car repair manuals for everyone.

EGR Backpressure Transducer: Testing and Inspection


Checking The VSV And EGR Vacuum Modulator:






1. Disconnect the vacuum hoses from ports P, Q and R of the Exhaust Gas Recirculation Vacuum Modulator.

2. Block ports P and R with your finger.

3. Blow air into port 0. Check that the air passes through to the air filter freely.

Checking The EGR Vacuum Modulator:






4. Start the engine and maintain speed at 2,500 rpm.

5. Repeat the above test. Check that there is a strong resistance to air flow. If operation is not as specified, replace the Exhaust Gas Recirculation vacuum modulator.

6. Reconnect the vacuum hoses to the proper locations.