Sub Converter

REMOVAL:

Tail Pipe Bracket:

1. Remove two bolts holding front exhaust pipe to tailpipe bracket.

2. Remove two bolts holding front exhaust pipe to tailpipe and remove the gasket.

Support Bracket:

3. Remove two bolts and support bracket.

4. Remove three nuts and front exhaust pipe.



INSTALLATION:

Front Exhaust Pipe:

1. Place new gasket on front of front exhaust pipe. Install pipe and tighten three new nuts.
Torque Value: 46 ft.lb (62 Nm)

Support Bracket:

2. Install support bracket with two bolts.
Torque Value: 15 ft.lb (21 Nm)


3. Place new gasket between exhaust pipe and tailpipe.

4. Temporarily install two bolts holding the front exhaust pipe to tailpipe.

5. Install two front exhaust pipe bracket bolts to tailpipe bracket.
Torque Value: 14 ft.lb (19 Nm)

6. Tighten two bolts holding front exhaust pipe to tailpipe.
Torque Value: 32 ft.lb (43 Nm)