PCV Valve Hose: Service and Repair
PCV Hose AssemblyREMOVAL
CAUTION: Do not remove unless the hose and diagnosis connector are damaged or need to be removed for servicing.
1. Remove the collector cover.
2. Remove the intake manifold.
3. Remove the secondary air combination valve RH.
4. Fit the depression in the ST with the protrusion of the clamp affixing the PCV hose assembly, unlock the clamp and remove the PCV hose assembly from cylinder block RH.
ST 18353AA000 CLAMP PLIERS
INSTALLATION
1. Install the PCV hose assembly, then lock by fitting the ST on the clamp protrusion.
NOTE: Use a new clamp.
ST 18353AA000 CLAMP PLIERS