Clutch Hydraulic System: Service and Repair
Clutch Fluid Air BleedingPROCEDURE
Note: Bleed air from the oil line with help of a co-worker.
Remove the air intake chamber.
Fit one end of a vinyl tube into the air bleeder of operating cylinder and put the other end into a brake fluid container.
(A) Clutch hose
(B) Air bleeder
Slowly depress the clutch pedal and keep it depressed. Then open the air bleeder to discharge air together with the fluid.
Release the air bleeder for 1 or 2 seconds. Next, with the bleeder closed, slowly release the clutch pedal.
Important: Cover the bleeder with waste cloth when loosening it, to prevent brake fluid from being splashed over surrounding parts.
(A) Operating cylinder
(B) Vinyl tube
Repeat the procedure 3), until there are no more air bubbles in the vinyl tube.
Tighten the air bleeder.
Tightening torque:
T: 8 Nm (0.8 (kgf-m, 5.9 ft. lbs.)
After depressing the clutch pedal, make sure that there are no leaks evident in the entire clutch system.
After bleeding air from the clutch system, ensure that clutch operates properly.
Install the air intake chamber.