New Special Tools

CATEGORY
Tools/Maintenance



SECTION
1



PAGE
22



ISSUE
08/92-0245



CODE
101



Subject:
New Tools for 1993

Application:
9000



With the introduction of the new TRIONIC engine management and the new ABS IV systems, a number of new special tools will be required to diagnose and fault trace these systems. These tools have been designated as required specials tools and will be distributed to your dealership automatically on or about October 1, 1992.






Break Out Box (BOB) 86 11 006

NOTE:
Not a new tool. An additional Break Out Box is required for fault tracing new TRIONIC engine control module (ECM).





Saab Diagnostic Adapter (SDA) 86 11 188

Allows communication between new TRIONIC ECM and ISAT (matches baud rates).






Break Out Box Overlay 86 11 204

Required for TRIONIC diagnostics to match 70-pin configuration of new ECM**





Break Out Box Cable (70-pole) 86 11 170

Required for TRIONIC diagnostics to match 70-pin configuration of new ECM**.



**To be used together with a pair of Break Out Boxes: i.e., additional Break Out Box must be purchased for use on 1993 models






Jumper Leads 86 11 212

Required for bleeding new ABS IV system.





ISAT Module (Program Board) 86 11 196

Updated EPROM allows communication with existing systems and those newly introduced for 1993.

Effective with M93 ISAT modules there is no core charge on new modules.





Puller Ring (23-tooth) 87 92 046

Required for manual transmission overhaul due to new final gear ratio