Flywheel

PDK
Flywheel to crankshaft M10 X 29 - always replace screws
Tighten fastening screws evenly and crosswise to the prescribed tightening torque.
Initial tightening 25 Nm (19 ftlb.)
Final tightening torque angle 120°

Dual-Mass Flywheel
Tighten fastening screws evenly and crosswise to the prescribed tightening torque.
Flywheel to crankshaft M10 X 29 - always replace screws
Initial tightening 25 Nm (19 ftlb.)
Final tightening torque angle 120°