Canister Purge Control Valve: Service and Repair

REMOVAL PROCEDURE

NOTE: Refer to EVAP Carbon Particles Notice in Service Precautions.

1. Disconnect the 2 vacuum hoses (1) from the EVAP canister purge valve (2).
2. Disconnect the electrical connector from the EVAP canister purge valve.
3. Remove the 1 nut from the bracket that retains the EVAP canister purge valve.
4. Remove the EVAP canister purge valve.
5. Before replacing the EVAP canister purge valve inspect the EVAP canister purge valve and the EVAP purge system for carbon particle contamination. Refer to EVAP System Cleaning.

INSTALLATION PROCEDURE
1. Before installing a new EVAP canister purge valve inspect the EVAP purge system for carbon particle contamination. Refer to EVAP System Cleaning.
2. Install the EVAP canister purge valve (2) to the bracket on the intake plenum.
3. Secure the EVAP canister purge valve with the nut.
4. Connect the electrical connector to the EVAP canister purge valve.

IMPORTANT: Refer to the Vehicle Emissions Control Information Label for the proper routing of the EVAP hoses.

5. Connect the 2 vacuum hoses (1) to the EVAP canister purge valve (2).